OnSSI NetDVMS 6.5, Руководство пользователя

Страница: 98 / 271

OnSSI NetDVMS Rev 6.5
Administration
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | info@onssi.com | page 87
Add New Event Window (Devices With One Input Event)
Note: Access to features in the Administrator application, including those described in the following, may
require administrator rights.
The Add New Event window (for devices capable of handling one input event only) lets you specify the
settings for an input event on devices capable of handling one input event only.
The Add New Event window (for
devices capable of handling one
input event only)
Access: You access the Add New Event window (for devices capable of handling one input event only)
by selecting the required device and clicking the Add new event... button in the I/O Setup window . Note
that this only applies when the selected device is capable of handling a single input event only. Some
devices are capable of handling several input events, in which case a different window, the Multiple Input
Events window , will open when the Add new event... button is clicked.
Note: Before you specify input events for a device, verify that sensor operation is recognized by the
device. Most devices are capable of showing this in their configuration interfaces, or via CGI script
commands. Also check the NetDVMS release note to verify that input-controlled operations are supported
for the device and firmware used.