OnSSI NetDVMS 6.5, Руководство пользователя

Страница: 163 / 271

OnSSI NetDVMS Rev 6.5
Administration
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | info@onssi.com | page 152
Archives for the selected camera will be stored in separate subdirectories under the Archives
directory at the location you specify. The subdirectories will be named according to the following
structure:
... \Archives\ [CameraMACAddress_VideoServerChannel] \ [DateAndTime]
Example: With the default archiving folder located under C:\videodata, recordings from an
archiving taking place at 23.15 on 1st June 2005 for a camera attached to channel 2 on a video
server device with the MAC address 00408c51e181 would be stored at the following destination:
C:\videodata\archives\00408c51e181_2\2005-06-01-23-15
If the device to which the camera is attached is not a video server device with several channels,
the video server channel indication in the subdirectory named after the device's MAC address will
always be _1. Example: 00408c51e181_1.
•
Dynamic Archiving
Note: Dynamic archiving is only possible if you have selected the Automatic path selection check
box. Select the check box if you wish to archive to several drives during the same archiving
process but do not want to worry about how much space is used on each drive.
By selecting the Automatic path selection check box, you can specify archiving locations for all
selected cameras in one go. Simply click the check box next to each drive to which you wish to
use as archives in the Select drives for dynamic archives section. The drives and paths you see in
the list are the same ones you can see in the My Computer folder.
Archiving will always take place to the drive with the most free disk space. What drive that is,
may change during the archiving process, and archiving may therefore happen to several drives
during the same process. However, that has no impact on how you find and view archived
recordings.
Note that it is only possible to select drives; you cannot edit the paths. An Archives directory will
automatically be created in each drive, and the archiving will take place the same way as
described previously under Specifying that Archiving Should Apply for Specific Cameras.
If you need to use a path for archiving that is not in the list, click the Add target button which is
described previously.
Archives for the selected camera will be stored in separate subdirectories under the Archives
directory at the locations you specify. The subdirectories will be named according to the following
structure:
... \Archives\ [CameraMACAddress_VideoServerChannel] \ [DateAndTime]