OnSSI NetDVMS Rev 6.5
Image Server Administration
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 175
Slave Administration Window
The Image Server Administrator's Slave Administration window lets you define all servers required to run
as slave servers under the NetDVMS server you are configuring.
Remember that only one server can be the master server. Any number of servers can be defined as slave
servers under the master server.
Slave Administration window
Access:
You access the Slave Administration window by clicking the Slaves... button in the
ImageServer
Administrator window
.
Adding a Slave Server
To add a slave server, click the Slave Administration window's Add Slave... button, specify the host name
of the slave server, specify the required port number, and click OK. This will add the slave server to the
Slave Administration window's list of slave servers.
Tip: Instead of specifying a host name when adding a slave server, you may specify the IP address of
the slave server. Simply type the IP address in the Hostname field when adding the slave server.
Remember that if on a local network, the local IP address of the slave server must be used.
Before you start using your master/slave setup, remember to verify that:
•
Required users have be defined on the master server as well as on each of the slave servers.
•
Outside Access has been enabled on all involved servers, and ports mapped accordingly in the
routers or firewalls used, if the slave servers are to be accessed from the internet.
Removing a Slave Server
To remove a slave server from the Slave Administration window's list of slave servers, select the slave
server in the list and click the Delete Slave button.
Содержание NetDVMS 6.5
Страница 2: ...This page intentionally left blank...
