OnSSI NetDVMS Rev 6.5
Administration
On-Net Surveillance Systems, Inc. | 222 Route 59, Suite 303, Suffern, NY 10901 | T: 845-369-6400 | F: 845-369-8711 | www.onssi.com | [email protected] | page 140
•
You are not limited to selecting output connected to the camera itself. If output has been
defined on other cameras/devices on the NetDVMS system, this output will also be
selectable in the All Outputs list.
•
An unlimited number of outputs may be selected this way.
•
If you have specified several outputs in the On Manual Control list, you are able to control
the sequence in which the outputs will be displayed in the NetGuard and NetGuard-EVS.
By using the up and down buttons located to the right of the list, you can change a
selected output's position in the sequence.
•
The Output Settings for [Device Name] [Camera Name] window also lets you select
output for automatic triggering on detected motion. This is further described in
How to
Add a Motion-Triggered Output
.
8.
When ready, click the Output Settings for [Device Name] [Camera Name] window's Exit button to
return to the Camera Settings for [Device Name] [Camera Name] window.
9.
In the Camera Settings for [Device Name] [Camera Name] window, click OK to return to the
Administrator window.
10.
Close the Administrator.
The defined output will now be available in the NetGuard/NetGuard-EVS, as described in the
beginning of this text.
Note that individual users' rights may prevent them from accessing specific cameras and/or
output in the NetGuard and NetGuard-EVS; such rights are defined through the
ImageServer
Administrator window
.
... Add a Motion-Triggered Output
Note: Access to features in the Administrator application, including those described in the following, may
require administrator rights.
Output (e.g. lights, sirens, etc.) connected to cameras or other devices can be triggered automatically
when motion is detected by a camera. The output does not necessarily have to be physically connected to
the motion-detecting camera.
To add a motion-triggered output, do the following:
Note: The following describes one way of adding a motion-triggered output, namely through the
Output
Settings for [Device Name] [Camera Name] window
. Alternatively, motion-triggered output may be based
on VMD events or—if a device has its own motion detection capabilities—on input events. Once such VMD
or input events have been added, they can be tied to output through the
I/O Control window
.
Note: In the following, it is assumed that the required output unit has been connected to the output port
on the required camera or other device, but that it has not yet been defined on your NetDVMS system. If
you have already defined the output on your system, begin at step 5.
1.
In the
Administrator window
, click the I/O Setup button.
This will open the
I/O Setup window
.
Содержание NetDVMS 6.5
Страница 2: ...This page intentionally left blank...
