Omron ZUV Series, Руководство пользователя

Страница: 12 / 126

10
In
troduct
ion
ZUV
User’s Manual
Introduction
Precautions for Correct Use
3.Cleaning
• Do not use paint thinner, benzene, acetone, or kerosene for cleaning since these
solutions dissolve the product surface.
• Use commercially available alcohol.
• To remove dirt or dust particles from the lens, wipe gently with a soft cloth (for
cleaning lenses) moistened with a small amount of alcohol.
4.About Resin Hardening
The hardening state of resin varies depending on various factors. Check the hardening
state of resin on an ongoing basis and set the optimum conditions.
5.Replacing the Head
When replacing the head, be sure to initialize the target channel on the controller.
If the target channel is not initialized, the information (cumulative irradiation energy,
power tuning data) of the head before replacement may still remain and prevent normal
functioning of the head.
p.3-22
6.Installing the Head
Be sure to use the mounting bracket (supplied) for installing the head.
Also, use the mounting bracket within the specified installation range.
The mounting bracket is used to radiate heat. Misuse of the mounting bracket may
cause the head to heat up and shorten the life of the LEDs.
7.Connecting the Head
When removing and re-connecting the head, be sure to connect to the same channel.
If the head is connected to a different channel, information (cumulative irradiation
energy, power tuning data) specific to the head is not inherited, preventing the head
from functioning normally.