![background image](http://html1.mh-extra.com/html/omron/zuv-series/zuv-series_user-manual_743261066.webp)
3-22
Sect
ion 3
SETUP
ZUV
User’s Manual
Section 3
Setting the System Environment
Initializing Setting Data
Return all bank settings and system settings to their factory settings.
All bank and system settings are initialized regardless of the currently selected bank No.
LOCK mode-[SYSTEM]-[ALL CLEAR]
Checking System Information
Display the version of the controller system.
LOCK mode-[SYSTEM]-[VERSION]
Disabling the Irradiation Buttons
Disable the EMISSION button and CH button.
LOCK mode-[SYSTEM]-[BUTTON LOCK]
Setting value
Description
SYSTEM DATA
Initializes the bank and system setting data.
HEAD DATA
Cumulative irradiation energy and power warning data are saved on the
controller. After the head is replaced, be sure to initialize this data.
Setting value
Description
EMISSION button
ON
Disables the EMISSION button.
OFF
Enables the EMISSION button. (default value)
CH button
ON
Disables the CH button.
OFF
Enables the CH button. (default value)
VERSION
AMP : ZUV-C30H
HEAD: ZUV-H30M
SOFT:VER.X.XXX
2008-03-01
00 : 00 : 00
OK
Содержание ZUV Series
