Omron ZUV Series, Руководство пользователя

Страница: 91 / 126

4-23
ZUV
User’s Manual
Section 4
CONNECTING TO EXTERNAL DEVICES
Section 4
Connection by USB/RS-232C
PATNSET command
This command sets the display type-specific and step-specific irradiation power and
time for the respective irradiation pattern.
(1) Parameter description
The following parameters can be set by the PATNSET command:
The PATNSET command is used to enter only steps to be set. The level and time of steps
that are not entered are set to "0". Also, names other than those which are optionally
obtained will not be obtained.
(2) Command/response examples
The following shows an example of this command:
The following shows an example of a response to this command.
PATNSET <Pattern No.> <Type> <STEP1 level> <STEP1 time>
<STEP2 level> <STEP2 time> ... <STEP16 level> <STEP16
time>
OK
Parameter Setting Range/Output Range
Pattern No. (mandatory) 1 to 16
Type (mandatory) 0: Step type
1: Linear type
STEP xx (xx=1 to 16) level 0 to 100 (%)
STEP xx (xx=1 to 16) time 0 to 9999 (*0.1s)
PATNSET 5 1 10 15 25 300 60 1000
←
Irradiation pattern 5 includes the pattern
irradiation (linear) settings for three steps.
The irradiation power and time of the
respective steps are; STEP1: 10%, 1.5
seconds, STEP2: 25%, 30 seconds, and
STEP3: 60%, 100 seconds.
PATNSET 6 0 20 100 40 15 60 2000 80 4000
←
Irradiation pattern 6 includes the pattern
irradiation (step) settings for four steps.
The irradiation power and time of the
respective steps are; STEP1: 20%, 10
seconds, STEP2: 40%, 1.5 seconds,
STEP3: 60%, 200 seconds, and STEP4:
80%, 400 seconds.
OK
←
Command execution ends successfully.
Command
Delimiter Delimiter
Response
Delimiter Delimiter
Delimiter Delimiter
Delimiter Delimiter
Delimiter Delimiter