Omron ZUV Series, Руководство пользователя

Страница: 50 / 126

3-6
Sect
ion 3
SETUP
ZUV
User’s Manual
Section 3
Setting the Irradiation Conditions
Setting Pattern Irradiation
Irradiation patterns can be freely set as a combination of irradiation power and time.
Optimal irradiation can be performed by creating and selecting patterns suited to the type
of object and adhesion.
■
Creating patterns
A maximum of 16 irradiation patterns can be created and registered.
LOCK mode-[CH SET]-[PATTERN EDIT]-[PATTERN 1 to 16]
• Patterns 1 to 16 are common to all banks.
About banks p.3-11
• For details on the settings, see Section 2, "Let's Try Irradiation".
p.2-4
Setting value Description
STEP Sets the irradiation
power and time in units
of steps. Interval
irradiation can also be
set by setting just a
time with power set to
0.
Range: Irradiation power: 0 to 100% (in 1% steps)
Total irradiation time: 000.0 to 999.9 (S)
LINEAR Sets the irradiation
power and time on a
continuous line in units
of points.
Range: Irradiation power: 0 to 100% (in 1% steps)
Total irradiation time: 000.0 to 999.9 (S)
To use a pattern
for the first time To select
a registered pattern To change
a registered pattern To clear
a registered pattern
Create the pattern.
Change the pattern.
Select the pattern.
Change to the RUN mode to irradiate UV light.
Set the pattern name. Set the pattern name.
Clear the patterns.
Irradiation power
(%)
Irradiation time (s)
STEP1
STEP2
STEP3
STEP4 STEP5
(max. 16 steps)
Irradiation power
(%)
Irradiation time (s)
(max. 16)