Omron ZUV Series, Руководство пользователя

Страница: 32 / 126

2-6
Sec
tion 2
ZUV BASIC
OPERA
T
ION
ZUV
User’s Manual
Section 2
Let's Try Irradiation
3.
Change the numerical value using the keys
and the digit using the keys, and press
the SET key to apply the setting.
Set the irradiation power to "65%" and the irradiation time to
"60 seconds".
• Irradiation power can be set as a percentage when the
setting of maximum power is 100.
• A maximum of 999.9 seconds can be set for the irradiation time.
• For channels to which a head is not connected, "- - -" is displayed and the cursor skips these
channels.
• To set an infinite irradiation time, select the unlimited irradiation mode in the Irradiation
Conditions Setting Menu.
LOCK mode-[CH SET]-[1CH to 4CH]-[PATTERN]-[LIGNT TIME]-[UNLIMITED]
p.3-5
Irradiating UV light
4.
Press the key to save the settings, and
turn the key switch to the [READY] position to
switch to the READY mode.
The save confirmation message is displayed when
the mode is switched to the READY mode without
saving the setting data using the MENU key. The
save confirmation message is displayed only when
the settings have been changed. Otherwise, it is not
displayed.
5.
Pressing the button starts UV light
irradiation.
The UV ON indicator lights up during irradiation, and
the irradiation conditions are displayed on the LCD
screen. In addition, a buzzer sounds at the start and
end of irradiation.
• The screen can be switched to the channel specific
detail display, and the cumulative energy or intensity
power adjustment screen.
About the screen display during operation
p.2-15
• To stop irradiation when the irradiation time has been set as unlimited, press the EMISSION
button or the corresponding CH button.
SAVE
SETTING DATA
EXE CAN
POWER/TIME
:CHANGE DISP
ALL CH STATE