![background image](http://html1.mh-extra.com/html/omron/sysmac-3g8f5-clk11-e/sysmac-3g8f5-clk11-e_operation-manual_742420089.webp)
5-3
Section
L: Data Link
75
3. Specify the processing for each node. Use the Cursor Keys to move the cur-
sor to the node for which the processing is to be changed, then press the
Enter Key.
Each time the Enter Key is pressed, the display will change as follows:
YES (data link tables deleted)
µ
No display (data link tables not deleted)
4. After specifying all the nodes from which data link tables are to be deleted,
press the F6 (Execute) Key. The deletion results screen will be displayed
and data link table delete processing will start.
Data link tables will be deleted in ascending order of node address.
To cancel the delete processing, press the F9 (Cancel) Key.
During delete processing, “Wait” will be displayed in the lower part of the
screen and the progress of processing will be displayed for each node.
When the delete processing for all the specified nodes is completed, “End”
will be displayed in the lower part of the screen.
5. Then, press the F10 (End) Key.
5-3-12 Printing Data Link Tables — P: Print Table
“P: Print table” is used to print the data link tables in the computer memory.
Note Select “Printer model” from the System Setup Menu and specify the printer mod-
el before using “P: Print table.”