![background image](http://html1.mh-extra.com/html/omron/omnuc-r88d-uep04v/omnuc-r88d-uep04v_user-manual_744168144.webp)
132
D
CN1: Control Output
Pin No.
Signal name
Function
Contents
7
BKIR
Brake interlock output
Outputs external brake interlock signal.
8
INP
Positioning competed out-
put
Turned ON when the pulse count remaining in the
deviation counter is equal to or less than the posi-
tioning completed range set in user parameter
Cn-1b.
9
TGON
Servomotor rotation
detection output
When setup parameter Cn-01 bit no. 4 = 0, this turns
ON if the Servomotor rotational speed exceeds the
value set for the Servomotor rotation detection
speed (Cn-0b).
CLIMT
Current limit detection out-
put
When setup parameter Cn-01 bit no. 4 = 1, this turns
ON if the forward/reverse rotation current limit (PCL/
NCL) is ON and the output torque reaches either the
external current limit (Cn-18, 19) or the level of the
lowest value set for the torque limit (Cn-08, -09).
If the forward/reverse rotation current limit (PCL/
NCL) is OFF, this output turns ON when the output
torque reaches the value set for the torque limit
(Cn-08, -09).
10
OGND
Output ground common
Output ground common for BKIR, VCMP, INP,
TGON/CLIMT
19
EGND
Encoder signal output
GND
This is the ground for encoder signal outputs.
20
+A
Encoder A-phase + output
Outputs encoder pulses divided according to user
parameter Cn-0A Line driver output (conforming to
21
–A
Encoder A-phase – output
parameter Cn-0A. Line driver output (conforming to
RS-422A).
22
–B
Encoder B-phase – output
Outputs encoder pulses divided according to user
parameter Cn-0A Line driver output (conforming to
23
+B
Encoder B-phase + output
parameter Cn-0A. Line driver output (conforming to
RS-422A).
24
+Z
Encoder Z-phase + output
Encoder Z-phase output (1 pulse/revolution). Line
d i
(
f
i
RS 422A)
25
–Z
Encoder Z-phase – output
(
)
driver output (conforming to RS-422A).
26
---
---
Do not connect.
27
---
---
30
ALO1
Alarm code output 1
When an alarm is generated for the Servo Driver,
h
f h
l
i
d
O
31
ALO2
Alarm code output 2
g
,
the contents of the alarm are output in code. Open
collector output: 30 VDC 20 mA max
32
ALO3
Alarm code output 3
collector output: 30 VDC, 20 mA max.
33
ALOCOM
Alarm code output GND
34
ALM
Alarm output
When an alarm is generated for the Servo Driver,
h
i OFF O
ll
35
ALMCOM
Alarm output GND
g
,
the output is OFF. Open collector output.
36
FG
Frame ground (see note)
Ground terminal for shield wire of cable and FG line.
Note Pin 36 is not used on models conforming to the EC Directives.
D
Connectors Used (36P)
Sumitomo 3M
Receptacle at Servo Driver
10236-52A2JL
Soldered plug at cable side
10136-3000VE
Case at cable side
10336-52A0-008
Specifications
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com