![background image](http://html1.mh-extra.com/html/omron/k6pm-th/k6pm-th_user-manual_743374048.webp)
2 Installation and Wiring
2 - 12
K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
Connecting Stranded Wires
Use the following procedure to connect the wires to the terminal block.
1
Hold a flat-blade screwdriver at an angle and insert it into the release hole.
The angle should be between 10° and 15°. If the flat-blade screwdriver is inserted correctly, you
will feel the spring in the release hole.
2
With the flat-blade screwdriver still inserted into the release hole, insert the wire into the terminal
hole until it strikes the terminal block.
3
Remove the flat-blade screwdriver from the release hole.
Checking Connection
• After the insertion, pull gently on the wire to make sure that it will not come off and the wire is
securely fastened to the terminal block.
• If you use a ferrule with a conductor length of 10 mm, part of the conductor may be visible after the
ferrule is inserted into the terminal block, but the product insulation distance will still be satisfied.
• To prevent short circuits, insert the stripped part of a stranded or solid wire or the conductor part of a
ferrule until it is hidden inside the terminal insertion hole.
• For the stranded wires, make sure that some of the wires from adjacent terminals are not accidentally
inserted.
(Refer to the following diagram.)
CAUTION
The terminal block may be damaged if you insert a flat-blade screwdriver in the release
hole with excessive force.
Insert the flat-blade screwdriver into the release holes with a force of 15 N or less.
Wire
(1)
(3)
(2)
Flat-blade screwdriver
Wire
(1)
(3)
(2)
Flat-blade screwdriver
10 to 15°
10 to 15°
Flat-blade screwdriver
Flat-blade screwdriver
<Upper side>
<Lower side>
Содержание K6PM-TH
