Omron K6PM-TH, Руководство пользователя

Страница: 47 / 198

2 - 11
2 Installation and Wiring
K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
2-3
W
irin
g
2
2-
3-1 H
ow to Co
nnect
to the Push-In Plus
Terminal Blocks

Nomenclature of the Terminal Block
 Connecting Wires with Ferrules and Solid Wires
Insert the solid wire or ferrule straight into the terminal block until the end strikes the terminal block.
If a wire is difficult to connect because it is too thin, use a flat-blade screwdriver in the same way as
when connecting stranded wire.
Push-In Plus Terminal Blocks
Item Specification
Construction
Push-in compatible with 1-pole 2-terminal interwiring wiring
Hands free
Front-in front and front-release
Applicable wires Stranded wires, solid wires, or ferrules
Applicable wire size
0.25 to 1.5 mm
2
(AWG24 to AWG16)
Wire insertion force
8 N max. for AWG20 wire
Screwdriver insertion
force 15 N max.
Wire stripping length
8 mm
*1
, 10 mm, 12 mm
*1. Without ferrules
Ferrule length 8 mm, 10 mm
Recommended
flat-blade screwdriver XW4Z-00B (Refer to Recommended Flat-blade Screwdriver on page 2-14 under
Recommended Ferrules and Crimp Tools on page 2-14.)
Current capacity 10 A (per pole)
Number of insertions
50 times
Recommended ferrules
Refer to Recommended Ferrules on page 2-14 under Recommended Ferrules and
Crimp Tools on page 2-14.
Nomenclature of the Push-In Plus Terminal Block and Connections
Terminal (Insertion)
hole
Release hole
Terminal (Insertion)
hole
Release hole
<Upper side> <Lower side>
Ferrules
Terminal (Insertion) hole
Release hole
Ferrules
Terminal (Insertion) hole
Release hole
<Upper side> <Lower side>