Omron K6PM-TH, Руководство пользователя

Страница: 112 / 198

5 Monitoring and Setting with the EtherNet/IP Communications
5 - 10 K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
5-3 Monitoring and Setting Using the CIP
Message Communications and
Examples of Communications
Instructions
This section shows the contents of monitoring and setting using the CIP message communications and
examples of communications instructions.
The services supported by the objects in Main Unit are as follows.
This object reads the Main Unit status and number of connected K6PM-TH sensors.
Specify 374 hex.
Specify 01 hex.
5-3-1 Services Supported by Objects in Main Units
Object name Class ID Function
Main Unit monitor
object 374 hex This object reads the Main Unit status and number of connected
K6PM-TH sensors.
K6PM-TH sensor moni-
tor object 375 hex This object reads the status of each sensor of the Main Unit and the cur-
rent temperature value of each segment.
K6PM-TH sensor tem-
perature monitor object 376 hex This object reads the current temperature value of each pixel of each sen-
sor of the Main Unit.
Main Unit setting object 377 hex This object writes the setting parameters (such as the existence of alarm
latch, transistor output method, enabling or disabling of "Use predicted
arrival time", etc.) of the Main Unit. Alternatively, it performs each opera-
tion instruction (such as K6PM-TH sensor registration, K6PM-TH sensor
location registration, reset of the maximum temperature of all sensors
connected to the corresponding Main Unit, etc.).
K6PM-TH sensor alarm
setting object 378 hex This object writes the temperature alarm parameter of each sensor of the
Main Unit.
Identity Object 01 hex This object reads the Main Unit software reset and the Main Unit identifi-
cation information, and also reads the state of the built-in EtherNet/IP
port.
TCP/IP Interface object F5 hex This object reads and writes settings such as the IP address, subnet
mask, default gateway, etc.
5-3-2 Main Unit Monitor Object (Class ID: 374 hex)
Service Codes
Service code Service name Description
Supported services
Classes Instances
01 hex Get_Attributes_All Reads the values of all attributes. Not supported Supported
0E hex Get_Attribute_Single Reads the value of the specified attribute. Not supported Supported
Class ID
Instance ID