Omron K6PM-TH, Руководство пользователя

Страница: 49 / 198

2 - 13
2 Installation and Wiring
K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
2-3
W
irin
g
2
2-
3-1 H
ow to Co
nnect
to the Push-In Plus
Terminal Blocks
 Removing Wires from the Push-In Plus Terminal Block
Use the following procedure to remove wires from the terminal block.
The same method is used to remove stranded wires, solid wires, and ferrules.
1
Hold a flat-blade screwdriver at an angle and insert it into the release hole.
2
With the flat-blade screwdriver still inserted into the release hole, remove the wire from the ter-
minal insertion hole.
3
Remove the flat-blade screwdriver from the release hole.
Wire
(1)
(3)
(2)
Flat-blade screwdriver
(1)
(2)
(3)
Wire
Flat-blade screwdriver
10 to 15°
10 to 15°
Flat-blade screwdriver
Flat-blade screwdriver
<Upper side> <Lower side>