257
Status Lists
Appendix
Device Error Status
Configuration Error A Status
Note
The above information also applies to the G3PW.
Bit position
Status
Bit description
Meaning
0
1
Bit 0
Not used.
Bit 1
Not used.
Bit 2
Not used.
Bit 3
Not used.
Bit 4
EEPROM Error
No error
Error
There is a memory error.
Bit 5
Calibration Error
No error
Error
There is a memory error.
Bit 6
Setting Value Error
No error
Error
There is a memory error.
Bit 7
Not used.
Bit 8
Configured Registration
Data Error
No error
Error
There is a memory error.
Bit 9
Model Information Data
Error
No error
Error
There is a memory error.
Bit 10
Not used.
Bit 11
Not used.
Bit 12
Model Information Mis-
matching Error
No error
Error
There is a memory error.
Bit 13
Not used.
Bit 14
Not used.
Bit 15
Not used.
Bit position
Status
Bit description
Meaning
0
1
Bit 0
Undefined Expand Units No error
Error
A Unit that is not recognized is connected.
Bit 1
Not used.
Bit 2
Too Many Expand units
No error
Error
More than 9 G3ZA Units are connected.
Bit 3
Expand Unit Failure
No error
Error
There is an error in communications with the G3ZA.
Bit 4
Expand Unit Connec-
tion Fault
No error
Error
A communications response has not been received
from a G3ZA after it was registered in the configura-
tion.
Bit 5
Not used.
Bit 6
Not used.
Bit 7
Not used.
Bit 8
Not used.
Bit 9
Not used.
Bit 10
Not used.
Bit 11
Not used.
Bit 12
Not used.
Bit 13
Not used.
Bit 14
Not used.
Bit 15
Not used.
C4/84 0001
C4/84 0002
V1.1
Содержание EJ1 EtherCAT
