Omron CS1W-HCA12-V1, Руководство по эксплуатации

Страница: 243 / 254

223
Precautions when Using the CX-Programmer
Appendix A
• The following symbols cannot be used when inputting instruction operands.
• If the following symbol is used in an instruction operand, change it to the correct address for the Customiz-
able Counter Unit (SR 23509: Unit Cycle Time Over Flag).
CQM1H symbol name CQM1H memory contents Customizable Counter Unit
area function
corresponding to CQM1H
address
Function CQM1H address
P_Sec_Min Upper bytes: Minutes
Lower bytes: Seconds AR 18 Special I/O area (pulse out-
puts or analog outputs)
P_Hour_Date Upper bytes: Day of month
Lower bytes: Hours AR 19 Special I/O area (pulse out-
puts or analog outputs)
P_Low_Battery Battery Low Flag SR 25308 Reserved by system.
P_Month_Year Upper bytes: Year
Lower bytes: Month AR 20 Special I/O area (pulse out-
puts or analog outputs)
P_Output_off_bit Load OFF Bit SR 25215 Reserved by system.
CQM1H symbol name CQM1H memory contents Customizable Counter Unit
area function
corresponding to CQM1H
address
Function CQM1H address
P_Cycle_Time_Error Cycle time over flag SR 25309 Reserved by system.