Omron CS1W-HCA12-V1, Руководство по эксплуатации

Страница: 68 / 254

48
Wiring
Section 3-3
Example
As an example, the wiring for connection to a motor driver is shown below.
Note 1. Be sure to connect the input (24 VDC) for the output power supply correct-
ly.
2. Connect loads of between 7 and 30 mA to pulse output. (When connecting
loads of less than 7 mA, add a bypass resistance.)
3. A resistance of 1.6 k
W
(1/2 W) is included in the internal circuits for pulse
output (A16, A18, B16, B18). Use in one of the ways shown below, accord-
ing to the power supply, the motor driver specifications, and other specifi-
cations.
4. The transistors in the internal circuits for pulse output turn OFF when pulse
output is stopped.
Analog Outputs
(CS1W-HCA22-V1/HCA12-
V1) Connect the output signals to the connector as shown below.
Customizable Counter Unit
24-VDC
power
supply
(Do not share the power supply
with other I/O circuits.)
Motor driver
Twisted-pair wires
CCW
input
CW
input
Output
power
supply
CCW
pulse
output
CW
pulse
output
1.6 k
Ω
1.6 k
Ω
+
−
(+)
(+)
(
−
)
(
−
)
7 to 30 mA
Output transistor
Output
Output
7 to 30 mA
Open-collector output
Open-collector output with 1.6-k
Ω
series resistance
Output transistor
During pulse output
Customizable Counter Unit
Special I/O connector
Pin number
Shield
Analog output 2
Analog output 1
B19 (V2+)
B20 (V2
−
)
A19 (V1+)
A20 (V1
−
)
+
−
+
−