Omron CS1W-CLK12-V1, Руководство по эксплуатации

Страница: 38 / 312

21
Specifications and Configurations Section 1-2
Optical Fiber Cable Accessories
Use the following accessories to assemble and test Optical Fiber Cables.
This manual does not provide details on Optical Fiber Cable preparation. For
details, refer to the instructions provided with the S3200-CAK1062 Assembly
Tool.
Optical Ring System
(GI Cable) The following devices are required for the Optical Ring (GI) Controller Link
Network.
Optical Fiber Cables
Use Optical Fiber Cables (Graded Index: GI) with the following optical specifi-
cations.
50/125
µ
m AGF Cable
Note L
f
is fiber length in km, T
a
is ambient temperature, and
λ
is the peak wave-
length of the test light source.
62.5/125
µ
m AGF Cable
Note L
f
is fiber length in km, T
a
is ambient temperature, and
λ
is the peak wave-
length of the test light source.
Connectors
ST Connector
Note 1. When connecting Controller Link Units (CS1W-CLK52-V1) used in duplex
operation in a CS1D System using a short GI cable, take note of the fol-
lowing points.
a) Use a cable of at least 50 cm in length.
Name Model Specifications
Optical Fiber Assem-
bly Tool S3200-CAK1062 Crimp-cut tool for the S3200-
COCF2011/2511 Connectors
Optical Power Tester S3200-CAT2700 With S3200-CAT2702 Head Unit and
adapter for the S3200-COCF2011/
2511 Connectors
Master Fiber Set S3200-CAT2001H One meter cable for use with the
S3200-CAT2702 Head Unit
Item Minimum Standard Maximum Unit Conditions
Numerical Aper-
ture (N.A.) --- 0.21 --- --- Theoretical value
Transmission
loss --- --- 3.0 Lf dB 0.5 km
≤
Lf
λ
= 0.8
µ
m
T
a
= 25
°
C 3.0 Lf + 0.2 0.2 km
≤
Lf < 0.5 km
3.0 Lf + 0.4 Lf < 0.2 km
Connection loss --- --- 1.0
λ
= 0.8
µ
m, one location
Transmission
bandwidth 500 --- --- MHz
⋅
km
λ
= 0.85
µ
m (LD)
Item Minimum Standard Maximum Unit Conditions
Numerical Aper-
ture (N.A.) --- 0.28 --- --- Theoretical value
Transmission
loss --- --- 3.5 Lf dB 0.5 km
≤
Lf
λ
= 0.8
µ
m
T
a
= 25
°
C 3.5 Lf + 0.2 0.2 km
≤
Lf < 0.5 km
3.5 Lf + 0.4 Lf < 0.2 km
Connection loss --- --- 1.0
λ
= 0.8
µ
m, one location
Transmission
bandwidth 200 --- MHz
⋅
km
λ
= 0.85
µ
m (LD)