Omron CS1W-CLK12-V1, Руководство по эксплуатации

Страница: 282 / 312

265
Memory Areas Appendix A
Software Switches (D 100
×
Unit No.)
Parameters for Automatically Setting Data Links: D 100
×
(Unit No.) + 1 to +11
Data link mode
00: Manual
01: Automatic
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 0 0 0 0 0 0
CS1 CPU Bus Unit PLC Setup Initialization (See note.)
0: Do not initialize CPU Bus Unit PLC Setup
1: Initialize CPU Bus Unit PLC Setup
Polling node/polled node bit
0: Polling node
1: Polled node
0
Note Initializes the network parameters registered in the CPU Bus Unit PLC Setup Area at the CPU Unit
and clears the data link tables.
Data link Start Bit
Start: Changed from OFF to ON or set to ON
when power is turned ON
Stop: Changed from ON to OFF
Transmission path format
Bit
9 8
0 0
Setting
Token-ring mode
0 1
1 0
1 1 Token-bus mode
Data link status storage format
0: 8-bit format
1: 4-bit format
Area 1 data link start word (BCD)
Area 1 type
Number of send words per node of area 1 (BCD)
Rightmost 4 digits of data link start word of area 2 (BCD)
Leftmost digit of data link start word of area
2 (BCD)
First data link status word (BCD)
−
: Not used.
Note N+10 and N+11 (node addresses 33 to 62) cannot be used in Optical Bus Systems.
Nodes to participate in the data links
The numbers indicate node numbers.
The value assigned indicates whether the
node is to participate in the data links.
Participate: 1
Not participate: 0
15 8 7 0
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
+1
+2
+3
+4
+5
+6
+7
+8
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
+9
Area 2 type
Number of send words per node of area 2 (BCD)
00
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
+10
− −
62 61 60 59 58 57 56 55 54 53 52 51 50 49
+11
BCD: Set the value as binary-coded decimal.