18
Cobra 350 User's Guide
05624-000 Rev. K
2.6 Additional Safety Information
l
Temperature — 5 to 40°C (41 to 104°F), with a recommended humidity range of 5% to
90%, non-condensing.
Non-Intended Use
The Cobra 350 is not intended for use in any of the following situations:
l
Use in the presence of ionizing or non-ionizing radiation
l
Use in potentially explosive atmospheres
l
Use in medical or life saving applications
l
Use in a residential setting. They are for industrial use only.
l
Use before performing a risk assessment
l
Where the equipment will be subject to extremes of heat or humidity
Non-intended use of robots can:
l
Cause injury to personnel
l
Damage itself or other equipment
l
Reduce system reliability and performance
If there is any doubt concerning the application, ask your your local Omron support to determ-
ine if it is an intended use or not.
2.6 Additional Safety Information
We provide other sources for more safety information:
Manufacturer’s Declaration of Incorporation
This lists all standards with which the robot complies. The Manufacturer’s Declarations for
the Cobra 350 robot and other products are in the
Manufacturer’s Declarations Guide
.
Robot Safety Guide
The
Robot Safety Guide
provides detailed information on safety for our robots. It also gives
resources for more information on relevant standards. It ships with each robot.
T20 Manual Control Pendant (Option)
The protective stop category for the pendant enable switch is category 1, which complies with
the requirements of ISO 10218-1. The pendant is designed in accordance with the requirements
of IEC 60204-1 and ISO 13849. The E-Stop button is ISO 13850 compliant.
NOTE:
Omron Adept Technologies, Inc. does not offer a cableless (wireless)
pendant.
The manual control pendant can only move one robot at a time, even if multiple robots are
connected to a SmartController EX, and the pendant is connected to the SmartController EX.
