104
Cobra 350 User's Guide
05624-000 Rev. K
8.2 Warning Labels
All warning labels on the Cobra 350 should be checked on a weekly basis for being present
and legible. If any of the labels are missing or illegible, they should be replaced. The labels,
with part numbers, are:
l
Read User’s Guide, Impact Warning Label, 18241-000
These labels instruct the user to read the user’s guide before using the robot, and to be
aware of the potential of impact by the robot.
Figure 8-1. Read Manual and Impact Warning Label
This is placed on the side of the upper cover of the robot.
l
Gravity/Brake Release Label, 18272-000
This label warns about the possibility of a robot joint dropping suddenly when the
brake release is pressed because of gravity. In the case of the Cobra 350, this applies to
the quill and tool flange.
Figure 8-2. Location of Brake Release/Gravity Warning Label
