2-3
Section
PCMCIA Card Installation
23
3. The version of Windows 95 can be determined from the “General” proper-
ties display. If the system version is “4.00.950B” or “4.00.950C,” the version
is OSR2. If the system version is “4.00.950” or “4.00.950a,” the version is not
OSR2.
4. Click on “OK” at the bottom of the System Properties window to close the
window.
Setup Procedure for Windows 98
Use the following procedure to set up the PCMCIA Card under Windows 98 envi-
ronment.
Before starting the setup procedure, remove any PCMCIA Cards (including
those for the CompoBus/D Configurator) that are currently being used. Since
the PCMCIA Card can’t be used temporarily during the setup, it may not be pos-
sible to continue the setup operation midway through the operation.
PCMCIA Card Setup
1, 2, 3...
1. Insert the PCMCIA Card installation disk provided into the floppy disk drive.
2. Install the PCMCIA Card when the Windows system is active. The PCMCIA
Card will be recognized as new hardware and the Add New Hardware Wiz-
ard window will be displayed. Click on “Next.”
3. Select “Search for the best driver for your device. (Recommended)” as the
driver search method, then click on “Next.”
Before Starting the Setup