2-3
Section
PCMCIA Card Installation
39
9. When the driver has been installed, the current screen will return to the
screen shown in step 4. Then, click on “Close,” remove the floppy disk, and
restart Windows 95.
Verifying Driver Resources
1, 2, 3...
1. Check that the driver has been installed correctly, as follows:
Click on the “Start” button, select “Control Panel” from the “Settings” menu,
double-click on the “System” icon in the Control Panel window, and select
the “Device Manager” tab from the top of the System Properties window
(refer to page 19). Check that “SST Devices” has been added, then click on
“+” to the left of “SST Devices” to check that “x” or “!” is not displayed at
PCMCIA Card driver “5136-DN-PCM(n)” where “n” is the PCMCIA slot num-
ber.
