Omcan MX-IT-0060-M, Инструкция по эксплуатации

Страница: 16 / 28

16
Maintenance
parts (Pos.1 and 3) in their original position and secure them with their original hardware.
ADJUSTMENT OF THE TENSION OF THE SPIRAL DRIVE BELTS
Look at Figure 13 to adjust the tension of the belts in Pos.1:
• Release the four screws in Pos.2, so that the plate Pos.3 can slide.
• Release the lock nut Pos.4.
• Use a hex wrench to undo the screw in Pos.5; As you do this, the plate in Pos.3 with the motor and the
pulley (Pos.6) slides and changes the tension of the belts in Pos.1.
• Adjust the tension of the belts in accordance with the instructions of the reference manufacturer.
• When you are done, lock the nut in Pos.4.
REPLACING THE SPIRAL DRIVE BELTS
Look at Figure 13 to replace the drive belts to the spiral:
• Release the belts in Pos.1.
• Pull the belts out.
• Fit new belts in to replace the old ones making sure that they fit perfectly in their grooves.
• Adjust the tension of the belts in accordance with the instructions of the reference manufacturer.
• When you are done, lock the nut in Pos.4.
IMPORTANT! To ensure the best performance of the machine and longer service life of the belts it is
crucial to replace all drive belts, not just some.