Omcan MX-IT-0060-M, Инструкция по эксплуатации

Страница: 21 / 28

21
Maintenance
Troubleshooting
the cover (for grid covers use a vacuum cleaner with a thin crevice tool); if needed to remove sticking
materials, use a brush. For grid covers use a synthetic, medium hard brush. Before cleaning with a vac and
strictly on occurrence, use compressed air to remove residues from the hardest parts to reach.
• Impregnate a cloth with drinking water and clean all food contact areas, including bowl interiors and rim,
dough stopper, bowl cover, pillar, spiral, and the area underneath the hear over the bowl. If needed,
dismount the pillar and wash in potable water, or eventually with neutral dish soap. In this case, make sure
to rinse it off well in potable water. Before fitting it back on, dry the flange and the holes of the fixing bolts.
• Use a clean cloth (wet but not soaked with drinking water) to clean the remaining areas of the machine and
dry them with a clean cloth.
Do not use steel tool to avoid scratching the reference areas. Do not use high-pressure water jets. Before
using the mixer again, make sure that all parts are dry. BEWARE: residual humidity may induce flour clotting
and incrustations that may be difficult to remove in the long term.
Mixer malfunction and/or failure Possible causes Solutions
The machine does not switch on. No power supply. Check correct plugging of the
mixer, make sure the main switch
is on I (ON) and the in-house
electrical safeties are not activated
(if so, reset them).
Safety fuses and no-volt release
switches are triggered.
Replace fuses and/or magneto-
thermal no-volt release switches
(extraordinary maintenance).
The mixer is switched on but does
not start.
The safety emergency button is
pressed down.
Reset the switch.
The front cover is not closed. Close the cover well.
The micro switch associated with
the bowl cover is defective.
Replace the cover (extraordinary
maintenance).
REFERENCE
Item Number Model Number Description Manufacturer Model Number
44269 MX-IT-0060-M
Mixer Spiral Dough 132 lbs. / 60 kgs.
2 - 4 HP / 1.5 - 3 KW 208V/60/3
cETLus / ETL Sanitation
MOMA 60