Omcan MX-IT-0060-M, Инструкция по эксплуатации

Страница: 8 / 28

8
Technical Specifications
Model MX-IT-0060-M
Capacity 132.2 lbs. / 60 kgs.
Spiral Motor 1 - 4 kW
Spiral Speed 1st speed: 104 RPM | 2nd speed: 208 RPM
Bowl Motor 0.37 kW
Bowl Speed 21 RPM
Flour Capacity (min - max) 17.6 lbs. - 72.8 lbs. / 8 kgs. - 33 kgs.
Bowl Capacity 101 L / 26.7 Gal
Bowl Diameter 23.6” / 599mm
Bowl Height 14.2” / 361mm
Electrical 208V / 60Hz / 3Ph
Dimensions
25” x 43.7” x 47.2” / 635 x 1110 x 1199mm
Weight
683.4 lbs. / 310 kgs.
Item Number
44269
Installation
ABOUT THE INSTALLATION SITE
The place where the machine will be kept and / or used must be in accordance with applicable laws and
ensure adequate protection from accidental damage, deterioration and weathering agents. The access ways
should provide enough clearance for handling the mixer without risk to the safety of people and the machine
itself. Flooring, walls and structures must comply with the applicable regulations and standards, and be suitable
for bearing the reference load plus an adequate safety factors; They must be easy to clean and disinfect. The
floor must be flat, not sloping, compact, and without holes and bumps. The in-house electrical and grounding
systems must comply with the applicable laws and regulations, and should be designed, manufactured,
maintained, and controlled by a licensed, qualified firm, if so required by law, with powers of testing and
releasing a statement of conformity. The in-house upstream switchboard should be fitted with efficient safeties
against any current overloads, short circuits, phase-to-phase, phase-neutral (if applicable), and phase-ground
faults.
TRANSPORTATION, HANDLING AND PLACEMENT
Depending on the final mixer application and contract agreements, mixers are packed (Figure 6/A) on the
pallet and secured with straps. Alternatively (Figure 6/B) they can be packed in a cardboard box, put on a pallet
and secured with straps (usually for EU countries) or even in a cage or wooden crate (countries outside the
European Community). Pallets and/or cages and/or boxes are loaded on the transport vehicle and secured
with crossbars and/or wooden blocks appropriately positioned/fastened to a load bearing part of the vehicle
in order to prevent misplacements during travel. To hoist and handle a pallet, cage or crate, use a lifting fork