Olympus VISERA OTV-S7V, Инструкция по эксплуатации, Страница: 99 / 216

Chapter 5 Operation
93
VISERA VIDEO SYSTEM CENTER OTV-S7V
 Change the focus free mode by operating the menu
1.
When used in combination with the automatic brightness control function,
set the light source to AUTO and the brightness level to “3”.
When using the CLV-S40, this procedure is not necessary.
2.
Depress the menu switch “ ” for approximately 1 second or the “F1” key
on the keyboard to display the menu.
3.
Depress the menu switches “ ” or “ ”, or the “

/

/

/

” key on the
keyboard to move the arrow “ ” to “FUNCTION CONTROL” (see Figure
5.14).
4.
Depress the menu switch “ ” or the “Enter” key on the keyboard to display
the next menu.
5.
Depress the menu switches “ ” or “ ”, or the “

/

/

/

” key on the
keyboard to move the arrow “ ” to “FOCUS FREE” (see Figure 5.37).
Figure 5.37
• When the OTV-S7V is connected to the ENF-V, CYF-V/VA or
HYF-V, “ELEC. SHUTTER” and “EXPOSURE AREA” shown
in Figures 5.37 and/or 5.38 are not displayed.
• When the OTV-S7V is connected to the LTF-V3 or A500**A
series, “EXPOSURE AREA” shown in Figures 5.37 and/or
5.38 is not displayed.
• When the OTV-S7V is connected to a camera head without
the focus free function, or to a videoscope, “FOCUS FREE”
shown in Figures 5.37 and/or 5.38 is not displayed.
[FUNCTION CONTROL]
ENHANCE >>LOW
FREEZE MODE >>FIELD
COLOR BAR >>OFF
COLOR SETTING >>
DISPLAY ID >>OFF
ELEC. SHUTTER >>ON
FOCUS FREE >>OFF
AGC >>ON
EXPOSURE AREA >>AUTO