Olympus VISERA OTV-S7V, Инструкция по эксплуатации, Страница: 170 / 216

164
Chapter 5 Operation
VISERA VIDEO SYSTEM CENTER OTV-S7V
8.
Depress the menu switch “ ” for approximately 1 second or the “Esc” key
on the keyboard to enter settings.
• Refer to Section 5.12, “Remote control switches” for
instructions on changing the image using the remote control
switches on the camera head or videoscope.
• The reverse mode setting is retained when the power is
turned OFF and the power cord is disconnected.
5.26 Picture in picture (type C only; see Section 2.5)
Images from other devices (For example, ultrasonic probes) can be shown on
the video monitor as main- or sub-images by controlling the menu switches or
keyboard (optional). The sub-image can be displayed in 2 different sizes and at
4 different positions on the video monitor.
Auto picture in picture
When inputting an image from another device to the OTV-S7V via the video input
terminal, both images can be shown on the video monitor by setting the
OTV-S7V as instructed below:
1.
Depress the menu switch “ ” for approximately 1 second or the “F1” key
on the keyboard to display the menu.
By simultaneously pressing the keyboard’s “Shift” key and
“B.O.D.” key that is set to “P IN P”, you can jump to step 6.
For instructions on setting the “B.O.D.” key to “P IN P”, refer
to Section 5.13, “Setting a function to the keyboard”.
2.
Depress the menu switches “ ” or “ ”, or the “

/

/

/

” key on the
keyboard to move the arrow “ ” to “B.O.D. CONTROL” (see Figure 5.89).
3.
Depress the menu switch “ ” or the “Enter” key on the keyboard to display
the next menu.
4.
Depress the menu switches “ ” or “ ”, or the “

/

/

/

” key on the
keyboard to move the arrow “ ” to “P IN P” (see Figure 5.113).