Olympus VISERA OTV-S7V, Инструкция по эксплуатации, Страница: 145 / 216

Chapter 5 Operation
139
VISERA VIDEO SYSTEM CENTER OTV-S7V
 Release the image by pressing a remote control switch
1.
Refer to Section 5.12, “Remote control switches” and set a remote control
switch to “RELEASE”.
2.
Press the OEP’s MENU button and use the “

” and “

” buttons to select
“FUNCTION-SETUP”.
3.
Set REMOTE 2 to “C&PRINT mode” and the timer to ON.
4.
When the remote control switch on the camera head or videoscope is
pressed, the image will be stored in the OEP’s or OEP-3’s memory. The
image will print when the OEP’s or OEP-3’s memory page is filled.
 Release the image by pressing a key on the keyboard
1.
Refer to Section 5.13, “Setting a function to the keyboard” and set the “F4”
key to “RELEASE”.
2.
Press the OEP’s MENU button and use the “

” and “

” buttons to select
“FUNCTION-SETUP”.
3.
Set REMOTE 2 to “C&PRINT mode” and the timer to ON.
4.
When the “F4” key is pressed, the image will be stored in the OEP’s or
OEP-3’s memory. The image will print when the OEP’s or OEP-3’s memory
page is filled.