Olympus VISERA OTV-S7V, Инструкция по эксплуатации, Страница: 194 / 216

188
Chapter 7 Troubleshooting
VISERA VIDEO SYSTEM CENTER OTV-S7V
Image does not
appear. The OTV-S7V is not connected to the wall
mains outlet. Connect correctly.
A fuse has blown. Replace both fuses.
The wall mains outlet is not supplied with
power. Turn ON the mains
supply for the wall
mains outlet.
The video plug of the camera head or
videoscope is not connected. Connect correctly.
The video cable is not connected. Connect correctly.
The light guide cable is not connected to the
endoscope. Connect correctly.
The endoscope is not connected to the
camera head. Connect correctly.
There is a problem
with the light
source. Power switch is not
ON. Turn the light source
ON.
Light guide cable is not
connected. Connect correctly.
The lamp is not
installed correctly. Install the lamp
correctly.
The light source’s
lamp has burned out. Replace the lamp.
There is a problem
with the video
monitor. Power switch is not
ON. Turn the video monitor
ON.
Incorrect setting of the
monitor input selector
switch. Set correctly.
Insufficient brightness
setting. Adjust brightness.
Incorrect video cable
connection. Connect correctly.
Excessively
bright image. Improper exposure level setting. Adjust as necessary.
Improper light source filter selection. Adjust as necessary.
Improper auto light adjustment setting. Set to an appropriate
setting.
Improper brightness setting on the light
source. Adjust as necessary.
Improper brightness setting on the video
monitor. Adjust as necessary.
Improper contrast setting on the video
monitor. Adjust as necessary.
Improper setting of the OEP-3/OEP Adjust as necessary.