Olympus VISERA OTV-S7V, Инструкция по эксплуатации, Страница: 196 / 216

190
Chapter 7 Troubleshooting
VISERA VIDEO SYSTEM CENTER OTV-S7V
Automatic
brightness
control does
not function. Light control cable is not connected. Connect correctly.
AUTO/MANUAL brightness selector on the
light source has not been set. Set correctly.
A light source without an automatic
brightness control function is being used. Use a light source with
automatic brightness
control.
Photographing
the image on
EVIS monitor
photo unit
SCV-3 is not
possible. A one second pause is not being taken after
the switch is pressed. Press the switch at
one second (or longer)
intervals.
SCV cable is not connected to the OTV-S7V. Connect correctly.
There is a problem
with the SCV-3. Power switch is not
ON. Turn the SCV-3 ON.
No film is loaded. Load film.
The video cable is not
connected. Connect correctly.
Printing with
color video
printer
OEP-3/OEP is
not possible. The OEP-3/OEP cable is not connected to
the OTV-S7V. Connect correctly.
There is a problem
with the
OEP-3/OEP. Power switch is not
ON. Turn the OEP-3/OEP
ON.
No paper in the
OEP-3/OEP. Load paper.
Improper settings. Adjust as necessary.
The video cable is not
connected. Connect correctly.
VTR recording
is not possible. Remote control cable is not connected to
OTV-S7V. Connect correctly.
The VTR is not set to record mode. Set the VTR to record
mode.
The video cable is not connected. Connect correctly.
Digital video
recorder
recording is not
possible. IEEE1394 cable is not connected. Connect correctly.
Improper DV format setting. Set correctly.
DV format
setting is not
possible. Digital video recorder is turned ON. Set the DV format with
the digital video
recorder turned OFF.