Olympus VISERA OTV-S7V, Инструкция по эксплуатации, Страница: 116 / 216

110
Chapter 5 Operation
VISERA VIDEO SYSTEM CENTER OTV-S7V
• When using a type A OTV-S7V, “B.O.D. CONTROL” (see
Figure 5.58) is not displayed.
• When the OTV-S7H-1D-F08E/L08E/D-L08E is connected to
the OTV-S7V, “SWITCH ASSIGNMENT” (see Figure 5.58) is
not displayed.
3.
Depress the menu switch “ ” or the “Enter” key on the keyboard to display
the next menu.
4.
Depress the menu switches “ ” or “ ”, or the “

/

/

/

” key on the
keyboard to move the arrow “ ” to the switch number that you would like to
set (for example, “SW1”) (see Figure 5.59).
Figure 5.59
• The number of switches displayed (see Figure 5.59) depends
upon the number of the remote control switches on the
camera head or videoscope.
• Depending upon the number and settings of the remote
control switches, the menu shown in Figure 5.59 may appear
different from that displayed on the video monitor.
5.
Depress the menu switch “ ” or the “Enter” key on the keyboard to display
the next menu.
6.
Depress the menu switches “ ” or “ ”, or the “

/

/

/

” key on the
keyboard to move the arrow “ ” to the next function that you would like to
set (for example, “EXPOSURE

”) (see Figure 5.60).
[SWITCH ASSIGNMENT]
SW.1>> <REL.+DIG.CAP.>
SW.2>> <ENHANCE>
SW.3>> <VTR+DV/DVCPRO>
SW.4>> <FREEZE>