Olympus VISERA OTV-S7V, Инструкция по эксплуатации, Страница: 191 / 216

Chapter 6 Care, Storage and Disposal
185
VISERA VIDEO SYSTEM CENTER OTV-S7V
Chapter 6 Care, Storage and Disposal
6.1 Care
• Use only dry gauze to clean the power switch. Do not
moisten the gauze, as the switch could fail or cause electric
shock.
• After cleaning the OTV-S7V, dry it thoroughly before use. If it
is used while wet, there is a risk of electric shock.
• Do not clean the video connector socket on the front panel,
or the terminals or AC power inlet on the rear panel.
Cleaning them can deform or corrode the contacts and cause
equipment damage.
• Do not autoclave or gas sterilize the OTV-S7V. Equipment
damage will occur.
• Do not wipe the OTV-S7V’s surface with an abrasive
material. The OTV-S7V’s surface will be scratched.
If the equipment is soiled, perform the following cleaning procedures
immediately after use. If cleaning is delayed, organic debris will solidify and it
may be difficult to effectively clean the OTV-S7V. The equipment should also be
cleaned routinely.
1.
Turn the OTV-S7V OFF and disconnect the power cord.
2.
Should the equipment become soiled with blood or other potentially
infectious materials, first wipe off all gross debris using a soft, lint-free cloth
moistened with detergent solution. Then, wipe the OTV-S7V with a clean,
lint-free cloth moistened with 70% ethyl or isopropyl alcohol.
3.
Wipe the OTV-S7V’s surface using a soft, lint-free cloth moistened with 70%
ethyl or isopropyl alcohol to remove dust, dirt, etc.
4.
Dry the OTV-S7V with a clean, lint-free cloth.