Olympus VISERA OTV-S7V, Инструкция по эксплуатации, Страница: 158 / 216

152
Chapter 5 Operation
VISERA VIDEO SYSTEM CENTER OTV-S7V
• During image capture, do not eject the PC card adapter or
Memory Card, and do not turn the OTV-S7V OFF.
Otherwise, images may not be stored correctly to Memory
Card.
• To release a frozen image, first press the switch that is set to
“FREEZE” or the “F3” key on the keyboard, then press the
switch that is set to “DIGITAL CAPTURE” or the “F4” key that
is set to “DIGITAL CAPTURE”.
• When you would like to operate Memory Card and the
SCV-3/OEP/OEP-3 remotely at the same time, set the
remote control switch to “REL.+DIG. CAP.”.
• Capturing a quick-moving image may cause the image to be
blurry.
• If the amount of free memory on Memory Card is insufficient,
the display is as shown on the video monitor in Figure 5.98.
In this case, pull out the PC card adapter from this instrument
and exchange a Memory Card with an empty card and
choose “Retry”. When it is not recorded, please reattach the
PC card adapter. Please use so as not to fill the capacity of
Memory Card. The image of SmartMedia is recommended to
be backed up to PC etc., regularly.
Figure 5.98
 Capturing the image by pressing a remote control switch
1.
Refer to Section 5.12, “Remote control switches” and set a remote control
switch to “DIGITAL CAPTURE”.
2.
Refer to “Folder name setting” on page 150 and set the folder name.
MEDIA FULL
<CHANGE MEDIA>
RETRY/CANCEL