Olympus VISERA OTV-S7V, Инструкция по эксплуатации, Страница: 146 / 216

140
Chapter 5 Operation
VISERA VIDEO SYSTEM CENTER OTV-S7V
5.22 Recording with the VTR
The image can be recorded by pressing a remote control switch or a key on the
keyboard (optional).
Do not connect or disconnect the VTR remote control cable
while the VTR is in the rec/pause mode. An unexpected
action of VTR will result.
• When controlling directly from the VTR, refer to the VTR’s
instruction manual.
• The VTR playback function is not available when using the
remote control switches on the camera head or videoscope.
• When you would like to have remote control over the VTR
and digital video recorder (types B, C, D and F only) at the
same time, set the remote control switch or the “F5” key on
the keyboard to “VTR+DV/DVCPRO”.
 Record the image by pressing a remote control switch
1.
Refer to Section 5.12, “Remote control switches” and set a remote control
switch to “VTR”.
2.
To begin VTR recording, press the remote control switch on the camera
head or videoscope. The menu shown in Figure 5.87 is displayed on the
video monitor.
Figure 5.87
<VTR> REC.