56
Settings “time program”
Display
Action
Description
time program
weekend
workdays
week block
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
or
Time programs can be individually defined for pre-
defined blocks of days or for each weekday individ
-
ually:
- week block (Monday - Sunday)
- weekend (Sa Sunday)
- workdays (Monday - Friday)
- Monday
- Tuesday
- ...
Select the day block or weekday with ↓ or ↑ and con
-
firm with (ENTER).
Attention:
The time programs must always refer to
one day, i.e. a switching time may not exceed the
24-clock-limit. Switch on before 24 clock and switch
off after 24 clock can not be detected by the soft-
ware.
If a switching time should be defined over 24 clock,
the switching time on the first day must be set up to
23:59 and the following day from 0:00.
weekend
next
temperature ---
1/3:
00
:00 - 00:00
n.act.
or
For each day block or weekday 3 different time pro-
gram pairs (1/3, 2/3 and 3/3) can be defined.
Select the switch-on time with (ENTER) (the value
flashes), set the value with ↓ or ↑ and confirm with
(ENTER).
weekend
next
temperature ---
1/3: 07:25 -
00
:00
n.act.
or
Select the switch-off time with (ENTER) (the value
flashes), set the value with ↓ or ↑ and confirm with
(ENTER).
weekend
next
temperature
21
°C
1/3: 07:25 - 11:45
n.act.
or
Select the room temperature (only for “automatic”
mode) with (ENTER) (the value flashes), set the val
-
ue with ↓ or ↑ and confirm with (ENTER).
Adjustable temperature range:
10°C - 40°C or no temperature (---)
Factory setting: ---
weekend
next
temperature 21°C
1/3: 07:25 - 11:45
n.act.
or
Select activation of the time program pair with
(ENTER) (“n.act.” flashes), with ↓ or ↑ change to “ac
-
tive” and confirm with (ENTER).
For deactivation of a time program pair you must
again change to “n.act.” (not active).
