Oliver 10010, Руководство пользователя

Страница: 16 / 44

B. REAR TABLE EXTENSION
STEP 1:
Attach the rods with the table
extension with screws and washers as
shown in
FIG. 6
.
STEP 2:
Loosen both knobs on the rear
side of the saw and insert the extension
rods into the holes. Tighten both knobs
at the desired adjustment as shown in
FIG. 7 .
STEP 3:
Insert the cotter pin to the two
rear extension shafts to position the
rear table extension as shown in
FIG. 8 .
FIG. 6
FIG.7
FIG. 8
Oliver 10010 10" Job Site Saw Owner's Manual 16