Oliver 10010, Руководство пользователя

Страница: 6 / 44

ELECTRICAL REQUIREMENT & SAFETY
• Double-Insulation
This table saw is a double-insulated tool
which is equipped with a polarized plug
(one prong is wider than the other).
The plug will fit into an outlet only one way.
Do not change the plug in any way.
• Power Supply
This table saw is wired for 115/120V operation. It should be connected to a power
supply that is 115/120V 50/60 Hz with a 15 Amp circuit. Use a separate and proper
circuit protection for this tool to avoid electrical hazards or damage to the tool.
• Use a Proper Extension Cord
When using an extension cord, make sure it is in a good working condition to
prevent short circuits and any electrical hazards. If any sign of cracking, fraying,
wear and/or damage appears, replace it immediately. Refer the chart below to
determine the right gauge for your extension cord length.
Amperage
on
Machine Tag
Cord Length (feet)
25’ 26’ – 50’ 51 – 100’ 101 – 150’
American Wire Gauge Number
0 – 6 18 16 16 14
6 – 10
18 16 14 12
10 – 12 16 16 14 12
12 – 16 14 12 Not Recommended
Oliver 10010 10" Job Site Saw Owner's Manual 6