Oliver 10010, Руководство пользователя

Страница: 11 / 44

Important Safety Instructions Continued
While Operating the Saw
•
Operator needs to maintain a balanced stance and keep the body under control
at all times.
• Concentrate on the job and be aware of kickback
that can cause an uncontrolled
workpiece to be thrown toward the operator and is the result of tool misuse and/or
incorrect operating procedures or conditions.
•
Keep the fence parallel to the blade at all times.
• Always push the workpiece through the cut. Never
feed handsfree. Use a push
stick if necessary.
• Set blade height to no more than
1/8” greater than the thickness of the material
being cut.
• The riving knife or the spreader
has to be used for all through sawing cuts. Make
sure the spreader is aligned with the blade properly.
• Use push stick for all non-through cuts, such as dadoing, grooving or molding, to
keep your hands and fingers away from the saw blade.
•
Always use the miter gauge when cross-cutting , and hold the workpiece firmly
against the miter gauge to ensure a straight and even cut.
•
Never use the fence as a cut-off stop when cross-cutting.
•
When starting the saw, always allow the blade to reach to its full speed before
contacting the workpiece.
• Do not feed the workpiece too aggressively
in order to prevent overheating and
causing saw blade warp or bind and creating kickback
•
Never reach over or behind the saw. Always keep arms, hands and fingers
away
from the blade.
Oliver 10010 10" Job Site Saw Owner's Manual 11