Oliver 10010, Руководство пользователя

Страница: 23 / 44

FIG. 33
Rear Table
Extension Knob
I. REAR EXTENSION TABLE
When ripping longer workpieces, the
rear extension table can be extended
for extra support.
Loosen two knobs under the rear
extension table as shown in
FIG. 33 ,
and pull the extension table outward as
shown in
FIG. 34
. Then, tighten the
knob to secure the extension table.
J. REPLACE SAW BLADE
STEP 1:
Remove the blade guard
assembly. (See page 17 blade guard
assembly).
STEP 2: Remove the table insert and
raise the blade all the way up.
STEP 3: Push arbor lock, as shown in
FIG. 35 , in and rotate the blade until it
locks in place as shown in
FIG. 36a
and
FIG. 36b
, to stop the saw blade turning.
DISCONNECT THE MACHINE
FROM POWER!
Arbor Lock
Location
FIG. 35
Arbor
Wrench
FIG. 36
a
b
Arbor Lock
Locks in
Place in the
Concave
Slot
Pull
Direction
FIG. 34
Oliver 10010 10" Job Site Saw Owner's Manual 23