Oliver 10010, Руководство пользователя

Страница: 35 / 44

MAINTENANCE
CLEANING
After each use, vacuum excess wood
chips and saw dust.
Periodically clean the inside of the
machine for dust control. Use an air
hose to blow out dust from motor fan
and motor cover.
PROTECTION
Keep pulleys and belts from dirt, dust,
oil and grease.
Remove rust from the tabletop with
WD-40 and a Scotch-Brite ™ Hand
Pad. Keep a light coat of WD-40 on the
table top when not in use.
LUBRICATION
In every six months, use a wire brush to
clean dust off the trunnions, gears,
blade elevation and fence/rail
mechanism as shown in
FIG. 57 and
apply white lithium grease or powdered
graphite to these parts.
SERVICE AND REPAIR
A quality power tools will eventually
require service or replacement parts
due to regular wear and tear. To ensure
authorized parts are used, perform the
serving and repairing under authorized
repair centers only.
TO REDUCE THE RISK OF INJURY, DISCONNECT THE MACHINE FROM ITS
POWER BEFORE PERFORMING SERVICE, MAINTENANCE OR REPAIR.
Fence Rail
Blade Elevation
Mechanism
Trunnions
FIG. 57
Oliver 10010 10" Job Site Saw Owner's Manual 35