Oliver 10010, Руководство пользователя

Страница: 10 / 44

Important Safety Instructions Continued
After reading and understand the owner’s manual and all the safety
instructions, and you are ready to use this machine, be sure to follow the
safety instructions of before, while and when done operating the saw.
Before Operating the Saw
• Make sure
the saw and its accessories are all assembled and in proper working
order.
• Before making any adjustments,
installing accessories or making repairs, the saw
should always be turned off and disconnected from its power source.
• Check the alignment
of the splitter to the blade, and the alignment of the fence to
the miter slot.
• Check blades
carefully before each use for proper alignment and possible defects.
• Be sure the blade flange
is clean and correctly assembled on the shaft and the
blade is properly supported.
•
Make sure the blade is installed to rotate in the proper direction. Refer to the arrow
on the blade. The teeth should be pointing down when viewing from the front of the
saw.
• Check to assure the blade guard functions properly and returns quickly to its rest
position. If the blade guard seems slow to return or “hangs up”, adjust, repair or
replace it immediately before using the machine.
• Make sure the rip fence
is parallel to the saw blade to prevent blinding and
possible kickback.
• Before turning on
the machine, remove all extra equipment such as keys,
wrenches, scraps, and cleaning rags away from the machine.
Oliver 10010 10" Job Site Saw Owner's Manual 10