Oliver 10010, Руководство пользователя

Страница: 17 / 44

FIG.9
FIG.10
FIG.11
C. BLADE GUARD ASSEMBLY
STEP 1:
Remove the table insert by
unscrewing the lock knob as shown in
FIG. 9 .
STEP 2: Remove the table insert and
turn the elevation hand wheel to raise
the saw blade to its maximum height as
shown in
FIG. 10 .
STEP 3:
Move the lock lever up to
release and remove the riving knife as
shown in
FIG. 11 .
STEP 4: Place the riving knife on the
storage as shown in FIG. 12 .
STEP 5:
Attach the blade guard
assembly to the spreader and tighten
the spreader by pressing the lock lever
down. Then, insert the blade guard
assembly to the clamp and place the
table insert back and tighten the lock
knob as shown in
FIG. 13
.
DISCONNECT THE MACHINE FROM
POWER BEFORE FOLLOWING THE
STEPS!
NOTE:
Make sure
the holes on the
spreader is in
place on the
bottoms on the
clamp in the
machine, and
make sure the
spreader plate is
clamped securely.
Guard Clear
Cover
Spreader
Anti-Kickback
Pawl
FIG.13
FIG.12
Oliver 10010 10" Job Site Saw Owner's Manual 17