Oliver 10010, Руководство пользователя

Страница: 9 / 44

Important Safety Instructions Continued
• NEVER PERFORM ANY OPERATION FREEHAND.
Always use the miter gauge or
rip fence to ensure a straight cut.
NEVER
use the miter gauge and rip fence at the
same time.
• USE A PUSH STICK
to keep your fingers away from the saw blade for short or
narrow ripping operations.
KICKBACKS
Kickback can cause serious injury. A kickback occurs when tension is created between
a workpiece setting against the fence and the blade, and causes the workpiece thrown
toward the operator.
PREVENTING KICKBACKS
•
Use the blade guard with splitter and riving knife whenever is possible.
• Make sure the spreader/riving knife is aligned with the blade.
•
Make sure the miter slot and the fence are parallel with the saw blade.
•
Always feed your workpiece through the saw blade prior to release.
•
Always use the miter gauge or rip fence to ensure a straight cut. Never feed your
workpiece freehand.
•
Use a push stick or feather boards to keep your hands farther away from the blade.
•
Stand to the side of your workpiece
Familiarize yourself with the following safety notices used in this manual:
This indicates if precautions are not heeded, it may result in
minor or moderate injury, and/or possible machine damage.
This indicates hazardous situation. If precautions are not heeded,
it could result in serious injury or possible death.
California Proposition 65 Warning
This product contains chemicals known to the State of California
to cause cancer, and birth defect or other reproductive harm. For more information,
visit www.p65warnings.ca.gov.
Oliver 10010 10" Job Site Saw Owner's Manual 9