Page 51
WIRELESS H2S TRANSMITTER (WT SERIES) - USER GUIDE
2.
Radio / Antenna
Symptom:
Action/Resolution:
No communication with the wireless
gateway
•
Confirm the antenna has a clear line of sight to all devices.
•
Reset the device.
•
Site Security Key may not match the gateway and other devices. Update Site Security and update all the
devices with the same BreeZ project file.
•
Increase the Tx power to all devices (if applicable).
•
The antenna should be installed at 10 ft or higher above ground for better line of sight.
Wireless communication cannot reach the
wireless gateway
•
Change the bit rate to the devices to 9600.
•
Use a different Antenna type with higher gain for the Wireless Gateway.
Wireless communication is intermittent
•
Change the bit rate of the devices to 115,200.
•
Antenna should be installed at 15 ft or higher for better line of sight.
•
Change the Channel of your Project File and update all of your system's devices.
•
To eliminate possible crosstalk or radio interference with other sites in the area, verify that the Enhanced
Site Security (ESS) feature is enabled.
Содержание WT H2S Series
Страница 6: ...Page 6 WIRELESS H2S TRANSMITTER WT SERIES USER GUIDE 3 Intrinsic Safety Control Drawings...
Страница 13: ...Page 13 WIRELESS H2S TRANSMITTER WT SERIES USER GUIDE 4 NETWORKING DIAGRAM...
Страница 33: ...Page 33 WIRELESS H2S TRANSMITTER WT SERIES USER GUIDE 16 SOFTWARE MAIN SCREEN VIEW...