OleumTech WT H2S Series, Руководство пользователя

Страница: 15 / 57

Page 15
WIRELESS H2S TRANSMITTER (WT SERIES) - USER GUIDE
6. REQUIRED ITEMS FOR BASIC SETUP
Transmitter Setup
• WT Series H2S Transmitter: WT-xxxx-H2S or WT-xxxx-H2S-A
• Sensor Module, Part # SX1000-H2S (supplied with the transmitter)
• Dust/Splash Guard, optional (supplied with the transmitter)
• Use only SX1000-BP3 Transmitter Battery Pack (supplied with the
transmitter)
• Mounting hardware (supplied with the transmitter)
• Bump Test Kit, Part # SX1000-BTK (sold separately)
• External alarm device(s) for WT-H2S-A only and external power source
(sold separately)
• H2S gas canister for calibration/bump test (sold separately), ≤ 50 ppm max
Gateway Setup
• OTC Wireless Gateway (fully set up, refer to the specific User Guide)
o DH3
o DH1 or DH2
o DH2-W
•
External power source for the wireless gateway (9-30 Vdc)
• External enclosure for the wireless gateway
Configuration Cable
•
Optional All-in-One Configuration Cable (SX1000-CC2). The cable is not
required for local configuration via the local display interface.
Software and PC
• Latest BreeZ® Configuration Software (v7.1 and later)
• Latest gateway firmware
• Latest firmware package
• PC with:
o Microsoft Windows® 7 or later
o 1 GHz or faster processor
o 1 GB or more RAM
o 500 MB Hard Disk Space or more
o USB or Serial port
Tools
•
Screwdriver set
•
Adjustable wrench
• 10 mm hex wrench for 3/4” NPT plug removal, WT-H2S-A only
• Any other tools or equipment for proper installation
Internet Access
• Internet access required for downloading software and firmware
•
Access to OleumTech OTC Download Center:
https://support.oleumtech.com