Page 11
WIRELESS H2S TRANSMITTER (WT SERIES) - USER GUIDE
3.
HARDWARE OVERVIEW
1.
Enclosure
All housing covers MUST be tightly fastened to protect against
external environmental elements.
All housing entries MUST be tightly SEALED using thread
seal tape or sealant. Failure to seal all port entries may
allow moisture to enter the transmitter housing, cause
damage to internal components, and void warranty.
Check the housing cover O-ring(s) every time the access cover is
removed.
- Apply lubricant if the O-ring is dry.
- Replace the O-ring when it is damaged, discolored, or showing
signs of wear.
- The O-ring should be seated firmly on the bottom of threads
without stretching to fit or without bulging.
The sensor must be calibrated on site prior to use due to
local geographical characteristics.
Содержание WT H2S Series
Страница 6: ...Page 6 WIRELESS H2S TRANSMITTER WT SERIES USER GUIDE 3 Intrinsic Safety Control Drawings...
Страница 13: ...Page 13 WIRELESS H2S TRANSMITTER WT SERIES USER GUIDE 4 NETWORKING DIAGRAM...
Страница 33: ...Page 33 WIRELESS H2S TRANSMITTER WT SERIES USER GUIDE 16 SOFTWARE MAIN SCREEN VIEW...
