OleumTech WT H2S Series, Руководство пользователя

Страница: 29 / 57

Page 29
WIRELESS H2S TRANSMITTER (WT SERIES) - USER GUIDE
5. Configure the primary wireless gateway.
a. Create a Gateway Name .
b. Select the
Type
.
c. Select
Tx Power
– Selecting a higher transmit setting, consumes more
power.
d. Select RTU Port RS232 or RS485 (terminal block).
This port is used for connecting to a third-party device such as PLC,
RTU, DCS, HMI, or EFM.
e. Select Slave ID .
f. Select Baud Rate that matches the Master device.
g. Select Config Port Mode (RS232): Modbus Slave option enables the
Modbus polling/writing feature using the BreeZ Software. The Debug
option is only for advanced users and polling register capability is
disabled.
h. Click Next .
6. Edit Ethernet / RTU Port 2 settings (DH3 only).
a. Ethernet : Select the DHCP Client or Static Address option.
i. If using the Static Address option, enter the network information.
ii. For help setting up the Ethernet connectivity, please consult with
your IT Specialist.
b. RTU Port 2 : See the previous section.
c. Click Next .
7. Add the transmitter(s).
a. Series – Select the WT Series – LCD.
b. Transmitter - Select the H2S option.
c. Click Add .