OHAUS 7000 Series, Руководство по обслуживанию

Страница: 84 / 107

APPENDIX A GEOGRAPHICAL ADJUSTMENT VALUES
Ohaus Corporation www.ohaus.com B-14 7000 Series T72XW Indicators Service Manual
If, following a non-stable (dynamic) weight value, stability has not been reached within the 3
second timeout interval, the response “S_I “ is sent and then a non-stable weight value.
Timeout then starts again form the beginning.
The range value must be entered in primary units and must be in the range of 1d to capacity.
B16.2 T
– TARE
Command: T
Response: T_S_ _ _ _100.00_kg Tare performed, meaning the scale was stable and weight
was within the weighing range.
Response: T_I Command understood, not executable at present.
Response: T_+ Upper limit of zero setting range exceeded.
Response: T_- Lower limit of zero setting range exceeded.
Comments
The existing tare will be overwritten and replaced by the new preset tare weight value.
The terminal will wait for up to 3 seconds after receiving a “T” command for no-motion. If motion
does not settle within this time, the command is aborted and the T_I response is sent.
B16.3 TA
– INQUIRE/ENTER TARE VALUE
Command: TA Inquiry of tare weight value
TA_Tare Preset Value_Unit Entry of a preset tare value.
Response: TA_A_TareWeightValue_Unit Current Tare weight value.
Response: TA_I Current Tare weight value cannot be transferred (the terminal is currently
executing another command, such as zero setting).
Response: TA_L Command understood, invalid parameter.
Example
Command: TA_10.00_kg Load a preset tare of 10 kg.
Response: TA_A_ _ _ _ _10.00_kg The 10.00 kg tare value was accepted.
Comments
The existing tare will be overwritten and replaced by the new preset tare weight value.
The terminal will automatically round the tare value to the current readability.
The preset value must be entered in primary units.